Burst pipes, flooded basements, storm damage. Certified crews respond 24/7, extract water fast, dry your home completely, and bill your insurance directly.
Published: October 12, 2026 | Last updated: October 12, 2026
Water damage restoration is the professional process of removing water, drying the structure, and repairing what the water ruined. It starts with emergency water extraction. It ends with your home back to normal.
Water spreads fast. It soaks into drywall within minutes. It warps wood floors within hours. It grows mold within 48 hours. Speed decides how bad the damage gets.
That is why restoration companies run 24/7 dispatch. A crew that arrives in one hour saves you thousands compared to a crew that arrives tomorrow.
One call covers every type of water emergency, residential and commercial.
Truck-mounted pumps extract standing water in hours, not days. Available 24/7.
Learn moreSafe pumping, sump pump failure response, and full basement dry-out.
Learn moreFreeze breaks, slab leaks, and supply line failures fixed and dried fast.
Learn moreApplied structural drying with LGR dehumidifiers saves walls and floors from demolition.
Learn moreContainment, HEPA filtration, and safe removal of mold after water events.
Learn moreRoof leaks and upstairs plumbing leaks traced, dried, and repaired.
Learn moreHurricane, flash flood, and hail damage response with board-up service.
Learn moreSix steps. No guesswork. You always know what happens next.
You call. We dispatch the nearest certified crew. Most metros see arrival in 45 to 90 minutes.
Technicians map every wet area with moisture meters and FLIR thermal cameras. You get a clear plan and price before work starts.
Truck-mounted extractors and submersible pumps remove standing water. Fast extraction prevents most secondary damage.
LGR dehumidifiers and high-velocity air movers dry walls, floors, and cavities. Daily moisture readings track progress.
EPA-registered antimicrobials sanitize affected surfaces. Air scrubbers clear odors and particles.
Damaged drywall, flooring, and trim get replaced. Your property returns to pre-loss condition.
The IICRC S500 Standard defines three water categories. The category decides the safety protocol, the equipment, and often the cost. Ask any contractor which category they found. Their answer tells you if they know their job.
| Category | What It Means | Common Sources | What Pros Do |
|---|---|---|---|
| Category 1: Clean Water | Sanitary water. No harmful contaminants. | Broken supply lines, sink overflows, rainwater | Extract and dry. Most materials can stay. |
| Category 2: Gray Water | Significant contamination. Can cause illness. | Dishwasher leaks, washing machine overflow, sump pump failure | Remove carpet pad. Sanitize all surfaces. |
| Category 3: Black Water | Grossly contaminated. Health hazard. | Sewage backup, rising floodwater, seawater | Full PPE. Remove porous materials. Antimicrobial treatment. |
Source: IICRC S500 Standard for Professional Water Damage Restoration (iicrc.org).
Honest pricing matters. Most competitors hide their numbers. Here are real national ranges based on industry data.
| Job Type | Typical Range | What Drives the Price |
|---|---|---|
| Minor cleanup (small leak, quick dry) | $500 to $1,500 | One room, Category 1 water, no demolition |
| Average residential job | $1,200 to $5,000 | Multiple rooms, drying equipment for 3 to 5 days |
| Major loss (sewage, large flood) | $5,000 to $10,000+ | Category 3 water, demolition, mold remediation |
| Whole-home flood restoration | $10,000 to $30,000+ | Structural damage, full rebuild of finishes |
Three factors move your price the most: water category, square footage affected, and how fast drying starts. A Category 1 leak dried on day one costs a fraction of the same leak found on day five.
Insurance often covers sudden events like burst pipes. It rarely covers gradual leaks or outside floodwater. We document everything for your adjuster. Read our full water damage restoration cost guide for the complete breakdown.
Fans from a hardware store cannot dry a soaked wall cavity. Professional drying needs professional machines. Here is what certified crews bring.
| Equipment | What It Does | Why It Matters |
|---|---|---|
| Truck-mounted extractors | Pull standing water at high volume | Remove hundreds of gallons per hour |
| LGR dehumidifiers (Dri-Eaz, Phoenix) | Pull moisture from air and materials | Work in low humidity where home units fail |
| High-velocity air movers | Push dry air across wet surfaces | Speed evaporation from walls and floors |
| FLIR thermal cameras | See hidden moisture inside walls | Find water your eyes cannot see |
| Pin and pinless moisture meters | Measure exact moisture content | Prove materials are dry before rebuild |
| HEPA air scrubbers | Filter mold spores and particles | Keep your air safe during demolition |
| Injectidry systems | Dry inside wall and floor cavities | Save walls that would otherwise be torn out |
Water damage does not wait for business hours. Neither do we. Find help in your area:
Dallas, Houston, San Antonio, Austin, Fort Worth and surrounding metros.
Los Angeles, San Diego, San Jose, Sacramento and the Bay Area.
Miami, Orlando, Tampa, Jacksonville and hurricane-prone coastal areas.
Phoenix, Tucson, Mesa and monsoon-season flood response.
Covering 8,988 cities across 47 states. Check your area.
Our dispatch teams target arrival within 45 to 90 minutes in most metro areas. Response time depends on your location, traffic, and current demand. Call (800) 555-0199 any time for an ETA.
Most residential jobs cost between $1,200 and $5,000. Small cleanups start near $500. Large losses with structural damage can exceed $10,000. Your final price depends on water category, square footage, and materials affected.
Most policies cover sudden and accidental water damage, like burst pipes and appliance failures. They usually exclude gradual leaks and floodwater from outside. We bill your insurer directly and help document the claim.
Most homes dry in 3 to 5 days with professional equipment. Severe saturation can take 7 to 10 days. We track moisture daily with meters and thermal cameras until readings hit safe levels.
Yes. Mold can start growing on wet materials within 24 to 48 hours. Fast extraction and drying stop it. If mold already started, we contain the area and remediate it under negative air pressure.
Mitigation stops the damage from getting worse. It covers extraction, drying, and demolition of ruined materials. Restoration rebuilds what was removed, like drywall, flooring, and paint.
Call now. A certified crew can be at your door within the hour.
Call (800) 555-0199